Crossbow™ Ratchet Tube Bender

Uniweld Products, Inc.

The new Uniweld “CrossBow” Ratchet Tube Bender enables the plumber and HVAC/R technician to create precision bends of up to 90 degrees on soft copper and aluminum tubing.  The low friction mandrels and rotating side bending blocks produce smooth, accurate bending in restricted spaces.  Minimum distortion bends are achieved for optimal flow and repeated alternate angled bends can be produced.  A large 11/8” O.D. mandrel and 5 additional interchangeable mandrels, (3/4”, 1/2”, 5/8”, 3/4”, & 7/8”) are included. Three rotating side bending blocks and the Crossbow™ Ratchet Bender complete the kit that’s packed in a fitted plastic case with carry handle and instructions.